Compaq:	180844, 180845, 180846, 180847, 180848, 203428, 203429, 337709, 337710, 337714, 337715
Lexmark :	#70 (12A1970), #75 (12A1975), #80 (12A1980), #85 (12A1985), 1361760, 13619HC, 13620HC, 13400HC, 1380619, 1380620, 1382050, #20 (15M0120), #25 (15M0125), #55 (16G0055), #65 (16G0065), #50 (17G0050), #60 (17G0060)
Sharp:	AJ‐C50B, AJ‐C50C, UC‐22BC, UX‐27CC
Okidata:	52109301, 52109302
Xerox:	8R7879, 8R7880, 8R7881, 8R7882, 8R12591

Jump to:

HOME

INDEX

General Instructions

Cleaning Solution Instructions

Chip Resetter

Tools required:

• Drill
• Ink bottle
• Knife
• Tape

Black cartridges

1. Enlarge the air vent hole in the top
   of the cartridges using the drill.
2. Remove the cap from the black ink
   bottle and insert the needle through the fill hole.
3. SLOWLY squeeze the bottle injecting ink into the cartridge.
4. DO NOT OVERFILL.
5. Replace the cap on the ink bottle and blot away excess ink.
6. Install in the printer.

Color cartridges

1. Pry the cartridge cap off with a knife.
2. Remove the cap from the correct color ink bottle and insert the needle through the fill hole.
3. SLOWLY squeeze the bottle injecting ink into the cartridge.
4. DO NOT OVERFILL.
5. Replace the cap on the ink bottle and blot away excess ink.
6. Secure the cartridge cap to the body with adhesive tape.
7. Install in the printer.

All brand names, model names and cartridge numbers are trademarks of their respective owners. This product is not affiliated with nor endorsed by those manufacturers.