HP:	#21, #22, #27, #28, #56, #57, #58, #60, #74, #74XL, #75, #75XL,
	#92, #93, #94, #95, #96, #97, #98, #99, #110, #901

Jump to:

HOME

INDEX

General Instructions

Cleaning Solution Instructions

Chip Resetter

Tools required:

• Ink bottle
• Tape

1. Locate the circular depressions under the label by rubbing your finger across the label.
2. Photo ink bottles have a color dot.
3. Remove the cap from the correct color ink bottle and insert the needle through the label into the cartridge.
4. SLOWLY squeeze the bottle injecting ink into the cartridge.
5. Go SLOW or the ink will mix in the printhead.
6. DO NOT OVERFILL.
7. Replace the cap on the ink bottle and blot away excess ink.
8. Seal each hole with adhesive tape.
9. DO NOT cover the vent notches on the sides of the label.
10. Install in the printer.

All brand names, model names and cartridge numbers are trademarks of their respective owners. This product is not affiliated with nor endorsed by those manufacturers.