- Place the cartridge on a flat
surface in an upright
position.
- Using the drill, create three
fill holes along the
centerline of the label.
- Remove the cap from the
correct color ink bottle and
insert the needle through
the fill hole.
- Make sure the needle goes
into the cartridge as far as
possible.
- SLOWLY squeeze the bottle injecting ink into the
cartridge.
- DO NOT OVERFILL. It is best to underfill this cartridge.
- Insert small plugs firmly into fill holes.
- Replace the cap on the ink bottle and blot away excess
ink.
9. Install in the printer.
Note: If cartridge does not print, place it upright on a damp
paper towel to draw the ink out.
