Jump to:

HOME

INDEX

General Instructions

Cleaning Solution Instructions

Chip Resetter

Tools required:

Buy this cartridge rather than refill it.
  1. Locate and remove the fill plug, if present,
    from the center of the green arrow on the top
    of the cartridge.
  2. Remove the cap from the black ink bottle
    and insert the needle through the fill hole.
  3. SLOWLY squeeze the bottle injecting ink into
    the cartridge.
  4. DO NOT OVERFILL.
  5. Replace the cap on the ink bottle and blot
    away excess ink.
  6. Place the cartridge printhead down on an absorbent paper towel for 10 minutes. The towel will pull some of the ink out of the cartridge.
  7. Install in the printer.#33 fill hole