- Peal off the top label.
- Enlarge the three small air holes with the drill.
- Note the color for each hole in the picture.
- Remove the cap from the color ink bottle and insert the
needle through the appropriate fill hole.
- Inject the ink into the chamber very SLOWLY until the
sponge is full.
- Replace the label on the top of the cartridge (this is optional
as the cartridge will function without the label).
- Install the cartridge and run several cleaning cycles per
the printer instructions.
Note: Each time the cartridge is removed from the printer, an
“empty cartridge” message appears and an orange light starts
blinking. Hold the paper feed button down for more than 5
seconds to override the error message and counter.
